1 - 25 of 615 items
1 2 3 4 5 6 7 8 9 10 11 Next
12v 150w Debuzzing Coil
W.A.C. Lighting
12V 150W debuzzing coil. 2 3/8" diameter.
12v/24v 300w Debuzzing Coil
W.A.C. Lighting
12V/24V 300W debuzzing coil. 4 3/8" diameter.
12v/24v 600w Debuzzing Coil
W.A.C. Lighting
12V/24V 600W debuzzing coil. 4 3/8" diameter.
150w Surface-Mounted Magnetic Transformer for Lbl Monorail
LBL Lighting
All LBL surface-mounted transformers are encased in a satin nickel finish metal housing and mount to any standard ceiling electrical box. Typically, a surface-mounted transformer is used when an accessible location above the ceiling or in a utility closet is unavailable for installing a remote transformer. The transformer includes a unique 36" coaxial feeder (shortenable at the time of installation) with a braided steel outer jacket that complements the rail system- if shortened, the feeder appears similar to a solid satin nickel straight stem. 12V 150W output. For dimming, a magnetic low voltage dimmer (sold separately) is required. 6" diameter X 3"H.
300w Surface-Mounted Magnetic Transformer for Lbl Monorail
LBL Lighting
All LBL surface-mounted transformers are encased in a satin nickel finish metal housing and mount to any standard ceiling electrical box. Typically, a surface-mounted transformer is used when an accessible location above the ceiling or in a utility closet is unavailable for installing a remote transformer. The transformer includes a unique 36" coaxial feeder (shortenable at the time of installation) with a braided steel outer jacket that complements the rail system- if shortened, the feeder appears similar to a solid satin nickel straight stem. 12V 300W output. For dimming, a magnetic low voltage dimmer (sold separately) is required. 7.56" diameter X 3.51"H.
300w Surface-Mounted Magnetic Transformer for Two-Circuit Lbl Monorail
LBL Lighting
All LBL surface-mounted transformers are encased in a satin nickel finish metal housing and mount to any standard ceiling electrical box. Typically, a surface-mounted transformer is used when an accessible location above the ceiling or in a utility closet is unavailable for installing a remote transformer. The transformer includes a unique 36" coaxial feeder (shortenable at the time of installation) with a braided steel outer jacket that complements the rail system- if shortened, the feeder appears similar to a solid satin nickel straight stem. 2 X 12V 150W output, controllable independently on the primary side (two wall switches can be used, for example, to control each circuit separately). For dimming, a magnetic low voltage dimmer (sold separately) is required. 7.56" diameter X 3.51"H.
3x Light Fitting for Square/Round Boon
Moooi
Light fitting to allow installating of three bulbs in the Square or Round Boon pendants (sold separately). Accepts 3 X 100W max medium base incandescent bulbs (not included).
500w Surface-Mounted Magnetic Transformer for Two-Circuit Lbl Monorail
LBL Lighting
All LBL surface-mounted transformers are encased in a satin nickel finish metal housing and mount to any standard ceiling electrical box. Typically, a surface-mounted transformer is used when an accessible location above the ceiling or in a utility closet is unavailable for installing a remote transformer. The transformer includes a unique 36" coaxial feeder (shortenable at the time of installation) with a braided steel outer jacket that complements the rail system- if shortened, the feeder appears similar to a solid satin nickel straight stem. 2 X 12V 250W output, controllable independently on the primary side (two wall switches can be used, for example, to control each circuit separately). For dimming, a magnetic low voltage dimmer (sold separately) is required. 10" diameter X 5.75"H.
60 Degrees (Black)
George Kovacs
Bold geometric design is the highlight of this ceramic table lamp. Black glaze finish with white cloth shade. Dimensions 27 1/2"H X 13 1/2"W. Uses 1 x 100Watt max E26 (medium base) 3 way lamp.
600w Dual Feed Surface-Mounted Magnetic Transformer for Lbl Monorail
LBL Lighting
All LBL surface-mounted transformers are encased in a satin nickel finish metal housing and mount to any standard ceiling electrical box. Typically, a surface-mounted transformer is used when an accessible location above the ceiling or in a utility closet is unavailable for installing a remote transformer. The transformer includes a unique 36" coaxial feeder (shortenable at the time of installation) with a braided steel outer jacket that complements the rail system- if shortened, the feeder appears similar to a solid satin nickel straight stem. 2 X 12V 300W output. For dimming, a magnetic low voltage dimmer (sold separately) is required. 10" diameter X 5.75"H.
96 Inch Straight Lbl Monorail Kit
LBL Lighting
This monorail kit allows the creation of a straight, 96" run. With adjustable angle, "T" and "X" connectors (sold separately), other configurations are possible - some confirgurations may require cutting the rail, which is easily accomplished in the field. For use with LBL lighting monorail light fixtures . This kit includes: - 2 X 48" straight rails - 1 X straight conductive connector - 1 X surface mounted 300W electronic transformer with 36" of flexible coaxial feeder cable - 3 X telescoping rigid standoffs (6"-10") - 4 X end caps
Abele Ceiling Light
Meltemi
The Meltemi line consists of a complete assortment of matte finish opal cased-glass lighting fixtures in timeless architectural forms. The triplex casing insures an even, luminous appearance. The Abele is one of Meltemi's newest additions; it features a twist-and-lock glass for easier relamping and a chrome body. Dimensions: 13.75" D X 4" H. Uses 2 X 60W 120V E26 (medium base) incandescent lamps (not included).
Absid (Large) Wall Light
B.Lux
Imported from Basque Country, Spain A simple frosted white polycarbonate cylinder with sleek chromed zamak finish make up the Absid wall sconce. Zamak is an alloy based mainly on Zinc and Aluminium . Dimensions: 3"W X 9.5"H X 4.75"Extension. Uses 1 X 40W 120V E26 (medium base) T10 incandscent or 1 X 18W 120V G24q2 compact fluorescent lamp, Title 24 Compliant. Lamps are not included.
Absid 3.5 Inch Wall Light
B.Lux
Imported from Basque Country, Spain A simple frosted white polycarbonate cylinder with sleek chromed zamak finish make up the Absid wall sconce. Zamak is an alloy based mainly on Zinc and Aluminium . Dimensions: 3"W X 3.5"H X 4.75"Extension. Uses 1 X 60W 120V E12 (candelabra base) G16.5 incandscent lamp.
Adjustable Angle Conductive Connector for Lbl Single Circuit Monorail
LBL Lighting
Used to join two sections of rail together to allow subtle to sharp horizontal angles (35 degree minimum / 325 degree maximum). Includes the two pieces required to connect one rail junction.
Adjustable Cable Standoffs for Lbl Single Circuit Monorail
LBL Lighting
Clean-looking and fully-adjustable cable standoff for ceiling mounting. Zgriplock allows for easy, one-touch shortening or lengthening in the field. Offered in four stock lengths. Self-drilling drywall anchor included with all hangers.
Adjustable Standoff with Connector Single-Circuit T-Trak
Tech Lighting
To ease Single-Circuit T-Trakrade; installation in spaces with high and/or uneven ceiling surfaces, use adjustable standoffs to adjust height and level of the system. Adjustable standoffs are not recommended on curvy runs or on runs with heavy heads, such as die cast ceramic metal halide heads. The adjustable standoff with connector is used to join sections of track together end to end while supporting the system. A wire grip allows you to easily shorten or lengthen the cable to size it for use. Use conductive type to continue power through connection. Use isolating type to isolate multiple circuits on one continuous run. Satin nickel or white finish.
Adjustable Standoff without Connector Single-Circuit T-Trak
Tech Lighting
To ease Single-Circuit T-Trakrade; installation in spaces with high and/or uneven ceiling surfaces, use adjustable standoffs to adjust height and level of the system. Adjustable standoffs are not recommended on curvy runs or on runs with heavy heads, such as die cast ceramic metal halide heads. The adjustable standoff without connector is used in the center of a track section or at the end of a run. A wire grip allows you to easily shorten or lengthen the cable to size it for use. Satin nickel or white finish.
Adorable Pendant Light
B.Lux
Imported from Basque Country, Spain The Adorable pendant shade is constructed of an inside and outside layer of stretched cream or black fabric trimmed in metallic gray. Center ball cluster holds three medium screw base sockets. Metal finish in matte grey. Adorable hangs from adjustable supports, creating an elegant yet practical pendant. BR>Dimensions 27.5"Diameter; 39" minimum height - 114" maximum height. Uses 3 X 75W 120V E26 (medium base) A19 incandescent lamps (not included).
Agaricon Table Lamp
Luceplan
The futuristic Agaricon table lamp, designed by Ross Lovegrove, is a fun lamp, characterized by a uniquely-shaped ribbed polycarbonate body. A curved extruded aluminum ring, perimetral to the lid, is the user's interface. By gently touching or pressing it quickly with the fingers, or suddenly loosing the hold, you can progressively modulate the light. The electronic sensor dimmer allows both the on/off function and dimming. The lamp body and its "lid" are made with high pressure injection-moulded polycarbonate. Integrated sensor dimmer. Uses 100W max A19 medium base incandescent bulb (not included).
Agave "Ball" Pendant Light
Luceplan
A novel play of transparencies, reflections and refractions allows the fluorescent lamp to emit light of strong visual impact. The radial composition of the transparent methacrylate ribs covers the source of light, preventing glare and light dispersion. A set of (yellow, red and blue) filters makes it possible with the greatest of ease to change the predominant colour of the lamp and of the light generated by it. Dimensions 10"D X 11.8"H 118" maximum overall height Uses 1 X 21W max 120V self ballasted compact fluorescent lamp (not included)
Ambit Pendant Light
Artemide
Design by Ron Rezek, 1998 Cable suspension luminaire for direct/indirect and diffused incandescent or fluorescent lighting. Inner diffuser in etched white hand blown glass and outer diffuser in either etched white or etched amber hand blown glass. Canopy in die-cast aluminum with matte nickel plated steel or matte white powder coated finish. Diffuser support rods in matte nickel plated steel or matte white powder coated finish. Incandescent suspension model with clear cord and stainless steel support cable, fluorescent model with white cord. Mounting to standard electrical junction boxes. Dimensions 8"D X 11"H; 83" maximum overall height, can be field-shortened. Choose 1 X 100W 120V E26 (medium base) A19 incandescent lamping (not included) or 1 X 26W 120V GX24q-3 compact fluorescent, electronic ballast, Title 24 compliant (lamps not included).
Arms - Biluz Wall Light - Closeout Special
Vibia
Arms - Biluz Design by Ramacute;n Benedito The Arms-Biluz swing arm lamp offers illumination and flexibility with its dual light sources, pivoting downlight, and two pivot points on the arm. Fixture has a double switch to control light output. Choose from satin gold finish with beige fabric shade or satin nickel finish with white shade. Dimensions 27.5" maximum extension X 18.5"H; 4.5"D canopy. Uses 1 X 75W 120V E26 (medium base) A19 incandescent lamp and 1 X 20W 12V Gz4 MR11 halogen lamp (lamps not included).
Automata Bisolite Grande Drop
Lujan + Sicilia
Design by Paul Gurry, 2006 Pendant fixture made of white opal polycarbonate, with polished chrome elements and steel suspension cable. Dimensions 50.75"D globe, equipped with 60" of field-cuttable cable and wire. Uses 3 X 150W 120V E26 (medium base) A21 incandescent lamps (included). Fixture is shipped assembled and ready to install.
Back Light Pendant
Fambuena
Design by Vincente Garcia Jimacute;nez, 2006 Pendant with handblown glass shade. Hardware finished in black chrome. Back Light is an homage to the past with a reference point firmly in the present, characterized by today's new dimensional values and materials. Available in two sizes and three colors. Small pendant available in opal white, cognac or graphite handblown glass. Dimensions 17.75"D globe; pendant equipped with 60" of field-cuttable wire. Uses 1 X 150W 120V E26 (medium base) A21 incandescent lamp (not included). Large pendant available in opal white handblown glass. Dimensions 23.75"D globe; pendant equipped with 60" of field-cuttable wire. Uses 1 X 150W 120V E26 (medium base) A21 incandescent lamp (not included).