3126 - 3150 of 9201 items
Prev 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 Next
Cyberdyne Blue Ice Plug-In Voltmeter Gauge
Cyberdyne Blue Ice Plug-In Voltmeter Gauge on Clearance.2 1/16diameter. Plugs in to cigarette lighter or power point. Range is 8-18 volts. Features high and low scrolling warnings. Monitors battery voltage when engine is off and electrical system output while engine is running.
Cyberdyne Blue Ice Transmission Temperature Gauge
Cyberdyne Blue Ice Transmission Temperature GaugeRequires 2 1/16hole for mounting with back clamp provided. Range is 70-260F. Features iand oscrolling warning and user adjustable lashingwarning. Requires Cyberdyne temperature sender shipped with gauge. Available with Silver, Blue, or Black bezels. Please select color below.Also Available with high and low memory recall feature. Pleases select below.
Cyberdyne Blue Ice Vacuum Gauge
Cyberdyne Blue Ice Vacuum GaugeRequires 2 1/16hole for mounting with back clamp provided. Requires included Cyberdyne sender. Range is 0-23 inches. Available with Silver, Blue, or Black bezels. Please select color below.Also Available with or without high and low memory recall. Pleases select below.
Cyberdyne Blue Ice Vacuum/Boost Gauge
Cyberdyne Blue Ice Vacuum/Boost GaugeRequires 2 1/16hole for mounting with back clamp provided. Requires Cyberdyne sender shipped with gauge. Range is 0-23psi and 0-23 inches. Available with Silver, Blue, or Black bezels. Please select color below.Also Available with or without high and low memory recall. Display flashes when in boost mode and is steady when not in boost mode. Pleases select below.
Cyberdyne Blue Ice Voltmeter Gauge
Cyberdyne Blue Ice Voltmeter GaugeRequires 2 1/16hole for mounting with back clamp provided. Range is 8-18 volts. Features iand oscrolling warning and user adjustable lashingwarning. Available with Silver, Blue, or Black bezels. Please select color below.Also Available with high and low memory recall. Pleases select below.
Cyberdyne Blue Ice Water Temperature Gauge
Cyberdyne Blue Ice Water Temperature Gauge on clearance.Requires 2 1/16hole for mounting with back clamp provided. Range is 70-260F. Features iand oscrolling warning and user adjustable lashingwarning. Requires Cyberdyne temperature sender shipped with gauge.
DC Shoes Bias Side Logo T-Shirt
Vivid Racing is bringing you the DC brand to the automotive lifestyle world. To go with their incredible driving shoes, Vivid Racing is also carrying some of their logo gear to deck you out at the track. Check out this Bias Side Logo T-Shirt available in TDove color. The shirt is 100% cotton and available in Medium or Large.
DC Shoes Black Box Logo T-Shirt
Vivid Racing is bringing you the DC brand to the automotive lifestyle world. To go with their incredible driving shoes, Vivid Racing is also carrying some of their logo gear to deck you out at the track. Check out this Black Box Logo T-Shirt available in Royal Blue. The shirt is 100% cotton and available in Medium, Large, and XLarge.
DC Shoes Catcher Logo T-Shirt Black
Vivid Racing is bringing you the DC brand to the automotive lifestyle world. To go with their incredible driving shoes, Vivid Racing is also carrying some of their logo gear to deck you out at the track. Check out this Catcher Logo T-Shirt available in Black size XLarge. The shirt is 100% cotton.
DC Shoes Pro Spec 1.0 Racing Shoes Black
"The most innovative skateboard shoe technology helps create the ultimate driving shoe"DC Shoes Pro Spec 1.0 driving shoe is finally here! With the need for a racing shoe to give comfort, improved driving capabilities, and function, Co-Founder Ken Block and Motocross/Rally giant Travis Pastrana made DC a household name in racing. With the success of their Gold and Bronze medals in the debut of Rally in the 2006 XGames and winning streak as Subaru of America team drivers, the all new Pro Spec 1.0 racing shoe will outshine itself from other driving shoes. DC used their Dynamic Grip Technology (DGT) which was originally developed to help skateboarders grip their boards more effectively and reduce wear in certain areas of the shoe. This innovative rubber bottom is used to increase pedal feel in the forefoot and durability in the heel where the shoe contacts the wheel well. DC designers also integrated their Drop-in Cushion System and Heel Gel for exceptional shock absorption and comfort in and out of the car. DC took its shoe making expertise with the develoments available on the rally market to create a top of the line driving shoe. With industry standard fire-resistant Nomex lining, as well as fire-resistant rubber and leather, the Pro Spec 1.0 is SFI and FIA certificed. A padded tongue and padded ankle area were added to prrovide comfort and protection for long hours in the car. A hidden lace pocket was also added to prevent laces from interfering with foot and pedal movements. DC's Pro Spec 1.0 driving show will prove to be the most innovative driving shoe on the market. Vivid Racing is 1 of the exclusive distributers of the new DC Shoes Driving Program. We stock all sizes and colors in the Chicane street shoe and ProSpec 1.0 Racing Shoe. We also carry an assortment of DC logo gear including hats, tees, and more. Want to know more about the DC Shoes product and rally team? Visit our MyVividRacing section HERE. Any further needs or wants on the DC Shoes products, please call us at 1-480-966-3040. Watch the DVD on DC Shoes Driving Program Here
DC Shoes Pro Spec 1.0 Racing Shoes Royal Blue
Vivid Racing has the all new 2008 DC ProSpec 1.0 Driving Shoe in the limited ROYAL BLUE. "The most innovative skateboard shoe technology helps create the ultimate driving shoe"DC Shoes Pro Spec 1.0 driving shoe is finally here! With the need for a racing shoe to give comfort, improved driving capabilities, and function, Co-Founder Ken Block and Motocross/Rally giant Travis Pastrana made DC a household name in racing. With the success of their Gold and Bronze medals in the debut of Rally in the 2006 XGames and winning streak as Subaru of America team drivers, the all new Pro Spec 1.0 racing shoe will outshine itself from other driving shoes. DC used their Dynamic Grip Technology (DGT) which was originally developed to help skateboarders grip their boards more effectively and reduce wear in certain areas of the shoe. This innovative rubber bottom is used to increase pedal feel in the forefoot and durability in the heel where the shoe contacts the wheel well. DC designers also integrated their Drop-in Cushion System and Heel Gel for exceptional shock absorption and comfort in and out of the car. DC took its shoe making expertise with the develoments available on the rally market to create a top of the line driving shoe. With industry standard fire-resistant Nomex lining, as well as fire-resistant rubber and leather, the Pro Spec 1.0 is SFI and FIA certificed. A padded tongue and padded ankle area were added to prrovide comfort and protection for long hours in the car. A hidden lace pocket was also added to prevent laces from interfering with foot and pedal movements. DC's Pro Spec 1.0 driving show will prove to be the most innovative driving shoe on the market. Vivid Racing is 1 of the exclusive distributers of the new DC Shoes Driving Program. Any further needs or wants on the DC Shoes products, please call us at 1-480-966-3040. Watch the DVD on DC Shoes Driving Program Here
DC Shoes Pro Spec 1.0 Racing Shoes Yellow/Blue
CLEARANCE FORYELLOW/BLUE SHOES ONLY."The most innovative skateboard shoe technology helps create the ultimate driving shoe"DC Shoes Pro Spec 1.0 driving shoe is finally here! With the need for a racing shoe to give comfort, improved driving capabilities, and function, Co-Founder Ken Block and Motocross/Rally giant Travis Pastrana made DC a household name in racing. With the success of their Gold and Bronze medals in the debut of Rally in the 2006 XGames and winning streak as Subaru of America team drivers, the all new Pro Spec 1.0 racing shoe will outshine itself from other driving shoes. DC used their Dynamic Grip Technology (DGT) which was originally developed to help skateboarders grip their boards more effectively and reduce wear in certain areas of the shoe. This innovative rubber bottom is used to increase pedal feel in the forefoot and durability in the heel where the shoe contacts the wheel well. DC designers also integrated their Drop-in Cushion System and Heel Gel for exceptional shock absorption and comfort in and out of the car. DC took its shoe making expertise with the develoments available on the rally market to create a top of the line driving shoe. With industry standard fire-resistant Nomex lining, as well as fire-resistant rubber and leather, the Pro Spec 1.0 is SFI and FIA certificed. A padded tongue and padded ankle area were added to prrovide comfort and protection for long hours in the car. A hidden lace pocket was also added to prevent laces from interfering with foot and pedal movements. DC's Pro Spec 1.0 driving show will prove to be the most innovative driving shoe on the market. Vivid Racing is 1 of the exclusive distributers of the new DC Shoes Driving Program. We stock all sizes and colors in the Chicane street shoe and ProSpec 1.0 Racing Shoe. We also carry an assortment of DC logo gear including hats, tees, and more. Want to know more about the DC Shoes product and rally team? Visit our MyVividRacing section HERE. Any further needs or wants on the DC Shoes products, please call us at 1-480-966-3040. Watch the DVD on DC Shoes Driving Program Here
Defi Blue Racer 52mm Boost Gauge
Defi Blue Racer 52mm Boost GaugeExclusive gauges for USA which are derived from quick-responsive and high-accurate Defi analog gauges. Boost, pressure, temperature, exhaust temperature, and volt gauges are available. The diameter is 2 1/16inches(52mm).As a result of the enquete, the most popular color of illumination was blue. Blue Racer Gauge was born out of an attempt to respond to the voice from you!!Features:-Stepping motor "STEP MASTER VS-2" provides smooth operation.-Ignition ON initiates self-luminescence gauge.-Blue illumination using high-brightness LEDs-Lightning-like Opening / Closing mode-Self-diagnostics function monitors both sensor disconnection and short-circuiting during startup. a) Sensor disconnection check This function reports any in-proper connections, broken or disconnected sensor or sensor wire. The pointer will wave between 250 and 260 degrees. b) Short-circuiting check This function indicates any short circuit on the sensor or sensor wire. The pointer will wave between 10 and 20 degrees.-Full 270 degrees sweep dial provides ultimate visibility.-A mounting bracket and instrument case is provided with the product.-The red triangle of the regular position bezel can be used as a warning indicator and others.-Does not require the Defi-Link Control Unit for use.-Blue Racer Gauge cannot be connected to the Defi-Link System.-Blue Racer Gauge is available only in USA. For Specs: CLICK HEREFor Manual: CLICK HERE*Please Call for Best Pricing - 1-480-966-3040*
Defi Blue Racer 52mm Exhaust Temperature Gauge
Defi Blue Racer 52mm Exhaust Temperature GaugeExclusive gauges for USA which are derived from quick-responsive and high-accurate Defi analog gauges. Boost, pressure, temperature, exhaust temperature, and volt gauges are available. The diameter is 2 1/16inches(52mm).As a result of the enquete, the most popular color of illumination was blue. Blue Racer Gauge was born out of an attempt to respond to the voice from you!!Features:-Stepping motor "STEP MASTER VS-2" provides smooth operation.-Ignition ON initiates self-luminescence gauge.-Blue illumination using high-brightness LEDs-Lightning-like Opening / Closing mode-Self-diagnostics function monitors both sensor disconnection and short-circuiting during startup. a) Sensor disconnection check This function reports any in-proper connections, broken or disconnected sensor or sensor wire. The pointer will wave between 250 and 260 degrees. b) Short-circuiting check This function indicates any short circuit on the sensor or sensor wire. The pointer will wave between 10 and 20 degrees.-Full 270 degrees sweep dial provides ultimate visibility.-A mounting bracket and instrument case is provided with the product.-The red triangle of the regular position bezel can be used as a warning indicator and others.-Does not require the Defi-Link Control Unit for use.-Blue Racer Gauge cannot be connected to the Defi-Link System.-Blue Racer Gauge is available only in USA. For Specs: CLICK HEREFor Manual: CLICK HERE*Please Call for Best Pricing - 1-480-966-3040*
Defi Blue Racer 52mm Pressure Gauge
Defi Blue Racer 52mm Pressure GaugeExclusive gauges for USA which are derived from quick-responsive and high-accurate Defi analog gauges. Boost, pressure, temperature, exhaust temperature, and volt gauges are available. The diameter is 2 1/16inches(52mm).As a result of the enquete, the most popular color of illumination was blue. Blue Racer Gauge was born out of an attempt to respond to the voice from you!!Features:-Stepping motor "STEP MASTER VS-2" provides smooth operation.-Ignition ON initiates self-luminescence gauge.-Blue illumination using high-brightness LEDs-Lightning-like Opening / Closing mode-Self-diagnostics function monitors both sensor disconnection and short-circuiting during startup. a) Sensor disconnection check This function reports any in-proper connections, broken or disconnected sensor or sensor wire. The pointer will wave between 250 and 260 degrees. b) Short-circuiting check This function indicates any short circuit on the sensor or sensor wire. The pointer will wave between 10 and 20 degrees.-Full 270 degrees sweep dial provides ultimate visibility.-A mounting bracket and instrument case is provided with the product.-The red triangle of the regular position bezel can be used as a warning indicator and others.-Does not require the Defi-Link Control Unit for use.-Blue Racer Gauge cannot be connected to the Defi-Link System.-Blue Racer Gauge is available only in USA. For Specs: CLICK HEREFor Manual: CLICK HERE*Please Call for Best Pricing - 1-480-966-3040*
Defi Blue Racer 52mm Temperature Gauge
Defi Blue Racer 52mm Temperature GaugeExclusive gauges for USA which are derived from quick-responsive and high-accurate Defi analog gauges. Boost, pressure, temperature, exhaust temperature, and volt gauges are available. The diameter is 2 1/16inches(52mm).As a result of the enquete, the most popular color of illumination was blue. Blue Racer Gauge was born out of an attempt to respond to the voice from you!!Features:-Stepping motor "STEP MASTER VS-2" provides smooth operation.-Ignition ON initiates self-luminescence gauge.-Blue illumination using high-brightness LEDs-Lightning-like Opening / Closing mode-Self-diagnostics function monitors both sensor disconnection and short-circuiting during startup. a) Sensor disconnection check This function reports any in-proper connections, broken or disconnected sensor or sensor wire. The pointer will wave between 250 and 260 degrees. b) Short-circuiting check This function indicates any short circuit on the sensor or sensor wire. The pointer will wave between 10 and 20 degrees.-Full 270 degrees sweep dial provides ultimate visibility.-A mounting bracket and instrument case is provided with the product.-The red triangle of the regular position bezel can be used as a warning indicator and others.-Does not require the Defi-Link Control Unit for use.-Blue Racer Gauge cannot be connected to the Defi-Link System.-Blue Racer Gauge is available only in USA. For Specs: CLICK HEREFor Manual: CLICK HERE*Please Call for Best Pricing - 1-480-966-3040*
Defi Blue Racer 52mm Volt Gauge
Defi Blue Racer 52mm Volt GaugeExclusive gauges for USA which are derived from quick-responsive and high-accurate Defi analog gauges. Boost, pressure, temperature, exhaust temperature, and volt gauges are available. The diameter is 2 1/16inches(52mm).As a result of the enquete, the most popular color of illumination was blue. Blue Racer Gauge was born out of an attempt to respond to the voice from you!!Features:-Stepping motor "STEP MASTER VS-2" provides smooth operation.-Ignition ON initiates self-luminescence gauge.-Blue illumination using high-brightness LEDs-Lightning-like Opening / Closing mode-Self-diagnostics function monitors both sensor disconnection and short-circuiting during startup. a) Sensor disconnection check This function reports any in-proper connections, broken or disconnected sensor or sensor wire. The pointer will wave between 250 and 260 degrees. b) Short-circuiting check This function indicates any short circuit on the sensor or sensor wire. The pointer will wave between 10 and 20 degrees.-Full 270 degrees sweep dial provides ultimate visibility.-A mounting bracket and instrument case is provided with the product.-The red triangle of the regular position bezel can be used as a warning indicator and others.-Does not require the Defi-Link Control Unit for use.-Blue Racer Gauge cannot be connected to the Defi-Link System.-Blue Racer Gauge is available only in USA. For Specs: CLICK HEREFor Manual: CLICK HERE*Please Call for Best Pricing - 1-480-966-3040*
Defi Center Gauge Hood Subaru WRX STI 02-07
Defi Center Gauge Hood Subaru WRX STI 02-07Defi Center gauge pod for your Subaru WRX or STI replaces the factory clock section. The gauge pod snaps in place and fits 60mm gauges. The gauges face straight back and are very visible. As used in the Vivid Racing Project WRX II. The pod holds 3 gauges in series and comes unpainted. *Please Call for Best Pricing - 1-480-966-3040*
Defi D-Link 52mm Exhaust Temperature Gauge Black Face
Defi D-Link 52mm Exhaust Temperature Gauge Black FaceWe have 1 EGT in stock and ready to ship. Brand New. -2 1/16 inch (52mm)-Black Face-Silver BezelFor more information on this product please contact us at 1-480-966-3040.
Defi D-Link BF Imperial US 60mm Exhaust Temperature Gauge Amber
Defi D-Link BF Imperial US 60mm Exhaust Temperature Gauge AmberDefi-Link Meter BFs are electronic blacked out gauges which are high response and refined design. When the car is off they have a black face with no numbers on them. As soon as the car is turned on, the gauges light up and are in full affect. Defi-Link Meter BFs need to be connected to Defi-Link Control Unit II. Up to 6 gauges can be connected and controlled by one Control Unit II. The name of the connection system is "Defi-Link System." Defi-Link System allows gauges to be attached to Defi-Link Control Unit II with a single "DAISY CHAIN" wiring system.Features:*Gauge dials are invisible while the ignition switch is off. Once the ignition switch is turned on, a clear display appears with white LED illumination. A red emitting needle pointer increases visibility. *The illumination color is Amber Red. *The illumination color cannot be changed.*Single Meter Visor can be attached. * Regular Position Bezel can be attached. *The scale can be chosen between SI units(kPa, ) and Imperial units(PSI, ). *Brightness can be adjusted. There are 10 stages of brightness, 5 stages in the daytime and 5 stages in the nighttime. The brightness decreases being interlocked with the illumination switch on. The decrease in lights can be canceled. *Driving data can be stored and can be replayed up to 3 minutes. *Double Warning function by a meter's LED lamp and a beep *If Defi-Link Indicator(sold separately) is connected, it blinks when any of connected meters' warning LED light. *Defi-Link Indicators can be connected to each gauge. *Differential pressure between fuel pressure and turbo can be shown if both of fuel pressure meter and turbo meter are installed.For More Features: CLICK HEREFor Specs: CLICK HEREFor Manual: CLICK HERE*Please Call for Best Pricing - 1-480-966-3040*
Defi D-Link BF Imperial US 60mm Exhaust Temperature Gauge White
Defi D-Link BF Imperial US 60mm Exhaust Temperature Gauge WhiteDefi-Link Meter BFs are electronic blacked out gauges which are high response and refined design. When the car is off they have a black face with no numbers on them. As soon as the car is turned on, the gauges light up and are in full affect. Defi-Link Meter BFs need to be connected to Defi-Link Control Unit II. Up to 6 gauges can be connected and controlled by one Control Unit II. The name of the connection system is "Defi-Link System." Defi-Link System allows gauges to be attached to Defi-Link Control Unit II with a single "DAISY CHAIN" wiring system.Features:*Gauge dials are invisible while the ignition switch is off. Once the ignition switch is turned on, a clear display appears with white LED illumination. A red emitting needle pointer increases visibility. *The illumination color is White. *The illumination color cannot be changed.*Single Meter Visor can be attached. * Regular Position Bezel can be attached. *The scale can be chosen between SI units(kPa, ) and Imperial units(PSI, ). *Brightness can be adjusted. There are 10 stages of brightness, 5 stages in the daytime and 5 stages in the nighttime. The brightness decreases being interlocked with the illumination switch on. The decrease in lights can be canceled. *Driving data can be stored and can be replayed up to 3 minutes. *Double Warning function by a meter's LED lamp and a beep *If Defi-Link Indicator(sold separately) is connected, it blinks when any of connected meters' warning LED light. *Defi-Link Indicators can be connected to each gauge. *Differential pressure between fuel pressure and turbo can be shown if both of fuel pressure meter and turbo meter are installed.For More Features: CLICK HEREFor Specs: CLICK HEREFor Manual: CLICK HERE*Please Call for Best Pricing - 1-480-966-3040*
-
Defi D-Link BF Imperial US 60mm Fuel Pressure Gauge Amber
Defi D-Link BF Imperial US 60mm Fuel Pressure Gauge AmberDefi-Link Meter BFs are electronic blacked out gauges which are high response and refined design. When the car is off they have a black face with no numbers on them. As soon as the car is turned on, the gauges light up and are in full affect. Defi-Link Meter BFs need to be connected to Defi-Link Control Unit II. Up to 6 gauges can be connected and controlled by one Control Unit II. The name of the connection system is "Defi-Link System." Defi-Link System allows gauges to be attached to Defi-Link Control Unit II with a single "DAISY CHAIN" wiring system.Features:*Gauge dials are invisible while the ignition switch is off. Once the ignition switch is turned on, a clear display appears with white LED illumination. A red emitting needle pointer increases visibility. *The illumination color is Amber Red. *The illumination color cannot be changed.*Single Meter Visor can be attached. * Regular Position Bezel can be attached. *The scale can be chosen between SI units(kPa, ) and Imperial units(PSI, ). *Brightness can be adjusted. There are 10 stages of brightness, 5 stages in the daytime and 5 stages in the nighttime. The brightness decreases being interlocked with the illumination switch on. The decrease in lights can be canceled. *Driving data can be stored and can be replayed up to 3 minutes. *Double Warning function by a meter's LED lamp and a beep *If Defi-Link Indicator(sold separately) is connected, it blinks when any of connected meters' warning LED light. *Defi-Link Indicators can be connected to each gauge. *Differential pressure between fuel pressure and turbo can be shown if both of fuel pressure meter and turbo meter are installed.For More Features: CLICK HEREFor Specs: CLICK HEREFor Manual: CLICK HERE*Please Call for Best Pricing - 1-480-966-3040*
-
Defi D-Link BF Imperial US 60mm Fuel Pressure Gauge White
Defi D-Link BF Imperial US 60mm Fuel Pressure Gauge WhiteDefi-Link Meter BFs are electronic blacked out gauges which are high response and refined design. When the car is off they have a black face with no numbers on them. As soon as the car is turned on, the gauges light up and are in full affect. Defi-Link Meter BFs need to be connected to Defi-Link Control Unit II. Up to 6 gauges can be connected and controlled by one Control Unit II. The name of the connection system is "Defi-Link System." Defi-Link System allows gauges to be attached to Defi-Link Control Unit II with a single "DAISY CHAIN" wiring system.Features:*Gauge dials are invisible while the ignition switch is off. Once the ignition switch is turned on, a clear display appears with white LED illumination. A red emitting needle pointer increases visibility. *The illumination color is White. *The illumination color cannot be changed.*Single Meter Visor can be attached. * Regular Position Bezel can be attached. *The scale can be chosen between SI units(kPa, ) and Imperial units(PSI, ). *Brightness can be adjusted. There are 10 stages of brightness, 5 stages in the daytime and 5 stages in the nighttime. The brightness decreases being interlocked with the illumination switch on. The decrease in lights can be canceled. *Driving data can be stored and can be replayed up to 3 minutes. *Double Warning function by a meter's LED lamp and a beep *If Defi-Link Indicator(sold separately) is connected, it blinks when any of connected meters' warning LED light. *Defi-Link Indicators can be connected to each gauge. *Differential pressure between fuel pressure and turbo can be shown if both of fuel pressure meter and turbo meter are installed.For More Features: CLICK HEREFor Specs: CLICK HEREFor Manual: CLICK HERE*Please Call for Best Pricing - 1-480-966-3040*
-
Defi D-Link BF Imperial US 60mm Gauge Package Amber
Defi D-Link BF Imperial US 60mm Gauge Package AmberDefi-Link Meter BFs are electronic blacked out gauges which are high response and refined design. When the car is off they have a black face with no numbers on them. As soon as the car is turned on, the gauges light up and are in full affect. Defi-Link Meter BFs need to be connected to Defi-Link Control Unit II. Up to 6 gauges can be connected and controlled by one Control Unit II. The name of the connection system is "Defi-Link System." Defi-Link System allows gauges to be attached to Defi-Link Control Unit II with a single "DAISY CHAIN" wiring system.Features:*Gauge dials are invisible while the ignition switch is off. Once the ignition switch is turned on, a clear display appears with white LED illumination. A red emitting needle pointer increases visibility. *The illumination color is Amber Red. *The illumination color cannot be changed.*Single Meter Visor can be attached. * Regular Position Bezel can be attached. *The scale can be chosen between SI units(kPa, ) and Imperial units(PSI, ). *Brightness can be adjusted. There are 10 stages of brightness, 5 stages in the daytime and 5 stages in the nighttime. The brightness decreases being interlocked with the illumination switch on. The decrease in lights can be canceled. *Driving data can be stored and can be replayed up to 3 minutes. *Double Warning function by a meter's LED lamp and a beep *If Defi-Link Indicator(sold separately) is connected, it blinks when any of connected meters' warning LED light. *Defi-Link Indicators can be connected to each gauge. *Differential pressure between fuel pressure and turbo can be shown if both of fuel pressure meter and turbo meter are installed.Package includes the Defi D-Link BF Imperial US 60mm Boost, Oil Pressure and EGT Gauges with Control Unit available with Amber LED illumination.For More Features: CLICK HEREFor Specs: CLICK HEREFor Manual: CLICK HERE*Please Call for Best Pricing - 1-480-966-3040*
-
Defi D-Link BF Imperial US 60mm Gauge Package White
Defi D-Link BF Imperial US 60mm Gauge Package WhiteDefi-Link Meter BFs are electronic blacked out gauges which are high response and refined design. When the car is off they have a black face with no numbers on them. As soon as the car is turned on, the gauges light up and are in full affect. Defi-Link Meter BFs need to be connected to Defi-Link Control Unit II. Up to 6 gauges can be connected and controlled by one Control Unit II. The name of the connection system is "Defi-Link System." Defi-Link System allows gauges to be attached to Defi-Link Control Unit II with a single "DAISY CHAIN" wiring system.Features:*Gauge dials are invisible while the ignition switch is off. Once the ignition switch is turned on, a clear display appears with white LED illumination. A red emitting needle pointer increases visibility. *The illumination color is White. *The illumination color cannot be changed.*Single Meter Visor can be attached. * Regular Position Bezel can be attached. *The scale can be chosen between SI units(kPa, ) and Imperial units(PSI, ). *Brightness can be adjusted. There are 10 stages of brightness, 5 stages in the daytime and 5 stages in the nighttime. The brightness decreases being interlocked with the illumination switch on. The decrease in lights can be canceled. *Driving data can be stored and can be replayed up to 3 minutes. *Double Warning function by a meter's LED lamp and a beep *If Defi-Link Indicator(sold separately) is connected, it blinks when any of connected meters' warning LED light. *Defi-Link Indicators can be connected to each gauge. *Differential pressure between fuel pressure and turbo can be shown if both of fuel pressure meter and turbo meter are installed.Package includes the Defi D-Link BF Imperial US 60mm Boost, Oil Pressure and EGT Gauges with Control Unit available with white LED illumination.For More Features: CLICK HEREFor Specs: CLICK HEREFor Manual: CLICK HERE*Please Call for Best Pricing - 1-480-966-3040*