226 - 250 of 680 items
Prev 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Next
Champion Blue 1/10 Scale Exceed-RC Radio Remote Controlled RC Racing Car, RTR
EXCEED-RC CHAMPION 1/10 On Road Electric Car Description: The new Exceed-RC Champion EP - 1/10 Scale Fully Ready to Run Electric On Road Car includes just about everything you need in the box. Battery, Charger, AM Radio is included. Just add Qty 8 AA batteries in the remote and you are ready to go. Fast Electric RC Car Doing Some Drifts. The Exceed RC/HSP Cars are capable of drifting at high-speed!!! SPECIFICATIONS: Model Exceed-RC Campion EP Electric Engine RC540 Stock Transmission Single speedwith Reverse Gear Ratio 6.25:1 Drive System Four Wheel Drive Radio System Two Channel A.M. Length 360mm Overall Height 112mm Wheelbase 260mm Front Tires On Road Rear Tires On Road Wheel Width 26mm Wheel Diameter 65mm Brake Type Reverse Braking Suspension Type 4 Plastic bodied oil filled shocks Approximate Weight 1330 grams Ground Clearance 4.5mm What's Needed 8 AA Batteries. Everything else is included
Clutch Compress Spring (Black/0.7mm)
Clutch Compress Spring (Black/0.7mm)
CMP Blue Extra 330L 50 - 56" Nitro Gas Engine Powered Aerobatic Aircraft ARF
The CMPro 50-size Extra-330L (2c 40~46 4c 52~63 ENGINE POWERED AEROBATIC AIRCRAFT) is available in two stunning color schemes.Both come with decals already applied, protected by clear coating. 90% of the model is pre-finished at the factory - you can enjoy flying this beauty with the least building time. And of course, it flies as good as it looks! Wingspan 1430mm Length 1270mm Weight 2.85~2.95 kg Wing Loading 92~95 dm/2 Airfoil Naca 0014 Wing Area 30.8 dm/2 Radio Control 4 Ch 5 Servos purchase separately 2 Strok Engine 40~46 purchase separately 4 Strok Engine 52~63 purchase separately Featuring gorgeous pre-finished parts and complete hardware pack. Comes with optional EP motor mount – EP or Glow? Make your choice! Plastic engine mount for glow power. Ready covered tailplane and rudder, unique color design to match with the fuselage and wings. Pre painted fiberglass fuselage. Internal construction is nice and neat. Bottom design with attractive color combination. You will never lose this plane from your sight! Light and strong aluminum wing joiner.
CMP Edge 540T Giant Scale 40cc~50cc GAS ENGINE POWER AEROBATIC AIRCRAFT
40cc~50cc GAS ENGINE POWER AEROBATIC AIRCRAFT ALMOST READY-TO-FLY RADIO CONTROLLED The Edge-540T (2000mm) ARF is a new member added to the CMPro aerobatic series. Agile and impressively coloured, it causes heads to turn. Construction is built-up balsa throughout except for the cowl and spats, this results in a light model. Our maximum for it is “It can if you can”! Wingspan 2000mm Length 1813mm Weight 6.65~6.85 kg Wing Loading 105~108 dm/2 Airfoil Naca 0012 Wing Area 63 dm/2 Radio Control 4 Ch 6 Servos purchase separately Gas Engine 40~50cc purchase separately This model has a shorter tail movement than the Giles’ and is capable of some impressive “flick” maneuvers. The whole plane is pre-decorated in eye-catching color design. Decals come ready applied and protected by a clear coat. The full aileron design enhances 3D performance. It can put on a magnificent display in the right hand! Nicely painted Polystyrene wheel pants are light and durable. Removable top hatch, easy to install, provides plenty room for assembly. Engine is to be mounted from the front which makes assembly easy and fun. All components are supplied pre-finished, with a quality hardware pack included.
CMP Marathon 20~24cc AEROBATIC AIRPLANE READY-TO-FLY RADIO CONTROLLED Airplane ( Giant ARF Plane )
20~24cc AEROBATIC AIRPLANE READY-TO-FLY RADIO CONTROLLED Wingspan 1800mm Length 1650mm Weight 5.3~5.4 kg Wing Loading 91~93 dm/2 Airfoil Naca 0012 Wing Area 58 dm/2 Radio Control 4 Ch 6 Servos purchase separately Gas Engine 20~24 purchase separately The CMPro Marathon is a beautifully finished aerobatic airplane with nice and simple construction. It comes pre-covered in an eye-catching design, you don’t even need to spend any time for further decoration since all the complicated painting is finished by the factory. Featuring all balsa construction (fuselage, wings and tails), the Marathon is light but extremely strong. The epoxy landing gear and polystyrene wheel pants also contribute to minimize the weight but maximum durability. The Marathon gives superb flying performance because: Full-aileron design with two separate servo controls, efficiently increases flying speed and makes the plane more responsive. Approx. 50% elevator in proportion. The elevator also uses two separate servo controls in order to increase thrusts and secure stability, such a design is not commonly used in models with the same size. Approx. 60% rudder in proportion. The 0.5mm linkage wire gives a direct control of the rudder. These features greatly enhance extreme performance, such as 3D manoeuvre and hovering. Assemble the Marathon Because of the simple and neat construction, the Marathon is very easy to assemble. Assembly is even fun if you are using a 20cc gas engine since the plane is specially designed for this size of engine. The fiberglass cowling is also designed for easy gas engine assembly and help reducing heat. The CMPro Marathon is combination of great looks and superb flying performance. Anyone wish to try precision aerobatics without spending a lot of time for building must not miss this beauty! Clear PVC canopy to allow light to pass through easily, with pre-finished white trim line. Designed to give superb performance with gas engine. Provides plenty of room to install servos and etc.. The main wings are to be joined by two alloy tubes. You will find it easy to set u
CMP Messerschmitt Bf 109F (HAHN) 120 - 73" Nitro Gas Radio Remote Control Airplane (Warbird)
Messerschmitt Bf 109F (HAHN) ALMOST READY-TO-FLY RADIO CONTROLLED 2C~120~160 4C~140~180 ENGINE For people who admire scale warbirds, the CMPro BF-109 does not fail to impress. Incredible replica model of the legendary Messerschmitt as if you were looking at the real thing The kit features a gorgeous fiberglass fuselage, with decals already applied and pre-painted Wingspan 1850mm Length 1668mm Weight 5.8~5.9 kg Wing Loading 103~105 dm/2 Airfoil Naca-2415 Wing Area 56 dm/2 Radio Control 6~7 Ch 9~10 Servos purchase separately 2 Strok Engine 120~160 purchase separately 4 Strok Engine 140~180 purchase separately What the Pro say... Simply the best ARF warbird I have ever seen. It's a whole new level for CMP. Quality is top notch. It goes together quickly, but keep in mind that this is a somewhat complicated airplane with lots of features, so you are not going to get it together in two evenings. The fuse is fiberglass, prepainted. It has a tremendous amount of detail. The tailwheel is in the scale position, rather than just sitting on the rudder post, and it has a neat linkage to connect to the rudder. There are multiple scale details on the fuse, such as seperately molded fiberglass exhaust stacks, airscoops, belly pan, and a neat belly tank that uses standoffs for better appearance rather than just being stuck to the bottom of the fuse. The wings are very cool. There are three servos per wing...flaps, ailerons, and airbrakes. All servos mount from the bottom with the neat CMP servo mounts with fairings, and all hinging and horns are done with hinge points and horny hinge points for better appearance. The airbrakes are very cool, one pops up from the bottom and the other from the top, using a clever provided mechanism. The plane is set up for retracts, and the retract mounts are hardwood and well-secured. Fixed gear with scale strut covers and gear doors are also included. The spinner is amazing, about six inch diameter, of scale profile, made just for this model. The canopy frame is prepainted. The wingtips have places for lights to be inset, and clear plastic covers are included. The stabs are airfoiled, and the LE o
CMP P-51 MUSTANG U.S.A. Fighter -50 Fiberglass ARF Nitro Gas Airplane NEW!!!
P51 Mustang 50 - 53" Nitro Gas ARF RC Plane P-51D-Mustang 50 is all laser cut and is a great scale airplane. Featuring pre-covered fuselage and wings with great looking color scheme sure to catch the eye of everyone. The plane comes with fiberglass cowl. Decals are already stuck to the with clear paint on top. Simple assembly of pre-finished parts enable the model to be ready for fly in very short time. Just a few simple jobs installing radio gear, installing engine, etc and you will be flying. *RETRACT NOTE* The retract bays are built into the wing from the factory, so the retracts will drop right in. Wingspan 53" Fuselage Length 46" Recommended Engine Size 2c/40,46 4c/52,63 Flying Weight 6.0 - 6.2 lbs Wing Area 480.6 sq in Airfoil 15% Semi Symmetrical Fuel Tank Spinner ****************NOTE*************** Engine, servos, transmitter, and other electronic items are sold separately! This is an airplane kit only, no electronics! Assembly required. Due to the United States Post Office's International shipping size limit, we can not ship this item outside of the United States, except Canada.
CMP Red Extra 330L 50 - 56" Nitro Gas Engine Powered Aerobatic Radio Remote Controlled Aircraft ARF
The CMPro 50-size Extra-330L (2c 40~46 4c 52~63 ENGINE POWERED AEROBATIC AIRCRAFT) is available in two stunning color schemes.Both come with decals already applied, protected by clear coating. 90% of the model is pre-finished at the factory - you can enjoy flying this beauty with the least building time. And of course, it flies as good as it looks! Wingspan 1430mm Length 1270mm Weight 2.85~2.95 kg Wing Loading 92~95 dm/2 Airfoil Naca 0014 Wing Area 30.8 dm/2 Radio Control 4 Ch 5 Servos purchase separately 2 Strok Engine 40~46 purchase separately 4 Strok Engine 52~63 purchase separately Featuring gorgeous pre-finished parts and complete hardware pack. Comes with optional EP motor mount – EP or Glow? Make your choice! Plastic engine mount for glow power. Ready covered tailplane and rudder, unique color design to match with the fuselage and wings. Pre painted fiberglass fuselage. Internal construction is nice and neat. Bottom design with attractive color combination. You will never lose this plane from your sight! Light and strong aluminum wing joiner.
CMP Yak 54 ARF 140 - 71.5" Nitro Gas Radio Remote Controlled Aerobatic RC Airplane Almost-Ready-to-Fly Plane
New Nitro Gas Yak 54 Giant Scale 140!!! Highest Quality Scale RC Airplane FOR Advance Flyer! Featuring pre-covered fuselage and wings with great looking color scheme sure to catch the eye of everyone. This airplane is all laser cut and is a great aerobatic performer. The plane comes with fiberglass cowl and wheel pants. Just a few simple jobs installing radio gear, installing engine, etc and you will be flying. Wing Span: 71.5" Weight: 11.67lb Length: 61.5" Wing Area: 806sq.in Wing Loading: 32.89oz./sq.ft. Engine Required: 2c 108 ~ 160, 4c 120 ~ 140 Radio Required: 4 Channel 6 Servos This Katana S has a new reinforced wing. The wings can be bought separate. Features: All parts are nicely wrapped in thin foam and plastic bags. All balsa-wood rib wing professionally covered! Aileron, elevator, vertical and rudder are built up and sheeted over making it strong and light. Control surfaces are professionally hinged and installed by factory. High quality fiberglass fuselage, cowl and wheel pants. Decals are professionally pre-applied by factory. Canopy is tinted and trimmed. Complete hardware pack: fuel tank, wheels, all rods and horns, engine mount etc. One and only Aerobatic Yak 140 in the Market! This plane is pre-built !! These are the photos of the kit. You only need to do minor assembly. ****************NOTE*************** Engine, servos, transmitter, and other electronic items are sold separately! This is an airplane kit only, no electronics! Assembly required. Due to the United States Post Office's International shipping size limit, we can not ship this item outside of the United States, except Canada.
CNC 2-Blade Set(CNC Grips & Swash Plate)
CNC 2-Blade Set(CNC Grips & Swash Plate)
CNC 3-Blade Set(CNC Grips & Swash Plate)
CNC 3-Blade Set(CNC Grips & Swash Plate)
CNC Double Bearing Tail Slider Set
CNC Double Bearing Tail Slider Set
CNC Metal Battery Landing
CNC Metal Battery Landing
CNC Metal Bearing Mount Set
CNC Metal Bearing Mount Set
CNC Metal Bump Resistance Landing Skid (2 pc)
CNC Metal Bump Resistance Landing Skid (2 pc)
CNC Metal Main Shaft Bearing Mount Set
CNC Metal Main Shaft Bearing Mount Set
CNC Metal Tail Gear Bearing set
CNC Metal Tail Gear Bearing set
CNC Tail Gear Case Set(for Belt version)
CNC Tail Gear Case Set(for Belt version)
CNC Tail Rotor Grip (with Hub) Set
CNC Tail Rotor Grip (with Hub) Set
Colco Thunderbird Helicopter 9.6V 700mAh NiMH Battery Charger
Colco Thunderbird Helicopter 9.6V 700mAh NiMH Battery Charger
Combo Special!!! Two RTF Mini Radio Remote-Control R/C Aircrafts RC Super Sonic Airplanes !!! High Quality, All Ready-To-Fly
The Buy-It-Now Price is for a pair of SUPER SONIC Mini Remote Control RC Airplanes, Brand New! You will receive 2 new ready-to-fly mini r/c airplanes! Sometimes it's hard to imagine what kind of fun toy you can play on an Easter Holiday with your friends or family! But with a Super Sonic at your fingertip, it doesn't really take much time to realize that this is exactly the type of fun you need and will get out of the Super Sonic Mini R/C aircrafts! Bring this baby to the park and enjoy! Kids, girls and everyone will love it! Features: ready to fly, out of the box; molded-foam fuselage and wing with durable tail boom; transmitter with built-in flight-pack charger; mini NiMH battery pack; two extra propellers "this cute model goes from box to ball field in less than 5 minutes. It's also a stable flyer that's nearly indestructible. Everyone who sees the Super Sonic wants to (and can!) fly it !!! Crash-proof fun for anyone!!! The smallest ready-to-fly RC plane yet, the Super Sonic is packed with high-tech electronics and engineering innovation, yet is is quite simply the easiest model to get into the air that I have seen. The Super Sonic is ready to go, out of the box; you need only drop 8 alkaline batteries into the transmitter, fast-charge the included flight pack and install it in the model-from box to ball field in 5 minutes! Power and control system The Super Sonic uses small twin motors for power and steering. At full power, both motors run at the same speed; when you input a turn, one of the motors slows down. No moving control surfaces, no trimming; what could be easier? Even folks who have never before held a transmitter can fly the Super Sonic; when we were trying this out for the first time at the gym, even the high school girls basketball team wanted to get in on the action, and they had a blast flying the plane around the ball field without any help. Transmitter The mini comfortable radio controller has a built-in field charger and indication status lights for the AA batteries. Charging The fast-charger that's built into the transmitter offers and fast-charge jack that charges the NiMH battery of the airplane in less than 3-5 minutes. This field-charging feature is extremely convenient, but because it doesn't have a voltage cutoff or timer, you need to keep a close watch on the battery you're charging. This is very important because if the battery is connected to the charger too long, it becomes extremely hot and could melt the wires or burn you. A good way to avoid this entirely is to hold the battery while you're charging it so you can feel how warm i
Component HD AV Cable for Wii 1.8M(Gold-plated/Ni-plated)
Features *For Nintendo Wii Game System; *Progressive-scan DVD playback in 480p; *Component (Y, Pr, Pb) high-definition video output: *Available in Ni-plated, Gold-plated, Gold-plated and netting.
Connecting block
Connecting block
connecting block (HM-5-8-Z-06)
connecting block (HM-5-8-Z-06)
Connecting block (HM-53-1-Z-18)
Connecting block (HM-53-1-Z-18)